Our Products: Graphite ESD Enamel

Technical Data Sheet

Formula No: MQW-L120

Proper surface preparation is essential. Best application method depends on individual conditions. We suggest:

Application:
Spray

Substrate:
Plastic

Surface Preparation:
Clean and Dry

Suggested Uses:
EMI Coating

VOC = 1.00

Forming Qualities: Good

Durability: Excellent

Weight per gallon: 11.7 - 11.9 pounds

Solids: 54 %wt 56 %vol

Viscosity: 18-22" #2 Zahn

Gloss: 15% at 60 degrees

Reduction: If needed, water

Curing Schedule: Forced air dry

Film Thickness:
wet -- 1.4 mil
dry -- 0.8 mil

Theoretical Mileage at 100% Efficiency:
at 1.00 mil 903 sq.ft./gal.
at 0.80 mil 1129 sq.ft./gal.

Impact: Good

Adhesion: Excellent

Hardness: HB pencil

Remarks:
Cohesion test: pass
Electrical resistance: < 900 Ohms/square @ mil
Abrasion resistance 40 MG @ 250 GM @ 500 cycles